My coax is plugged in at the antennas signal collector box, then at the tv coax is screwed into amplifier then amplifier is screwed on to tv.
When we disconnect the cable and connect the antenna coaxial cable we dont get any stations.
Channel master cm-7777hd tv antenna amplifier is available from these retailers:Channel master cm-7777hd tv antenna amplifier.
If the broadcast towers are over 50 miles away, most likely you will have to mount an antenna in the attic or on the roof.
How to hook up digital antenna to multiple tvs
The great part about using an over the air antenna is, you can tap into the existing wiring to plug in your hd antenna.
Next i plugged in the coaxial cable from the antenna wall jack into the input of the splitter.
For certain setups, a passive splitter (unpowered) will work if your cable runs are short and your antenna booster is powerful enough.
In such cases, i recommend using a service like angies list or taskrabbit to find a top rated handyman in your area that can install your tv antenna properly.
How to hook up outdoor antenna to multiple tvs
, too am cutting cable and clearly understand your instructions for connecting to my attic-installed antenna.
Coaxial cable (50 feet) with f-male connectors - ultra series - tri-shielded ul cl2 in-wall rated rg6 digital audio / video - includes removable ez grip caps (part# cj50-6bf-n1 ).
Find out if you need an amplifier as you learn the difference between antenna gain and amplifier gain.
The rule is to keep the splitter after the antenna and the antennas power amplifier.
The multiple output ports on the rf splitter, you will run a coaxial cable out to the different tv sets in your home.
Signal splitter, how to split tv signals, get multiple tv aerial points from one aerial.
So, its not surprising that one of the most common questions i get asked is whether or not its possible to connect multiple tvs to a single antenna.
Now the whole family can watch on multiple tvs without arguing about which program to view.
Updated: monday, may 1, 2017having an hd antenna is an excellent way to get free television channels.
I too am looking to cut the cable cords and asked this very question can i hookup my 3 television sets to 1 digital antenna?
My antenna is an esky hg997, i pick up about 50 channels, but i would like to add one or two more tvs.
Currently have directv and was wondering if i can use the same cables connected to the dish and connect them to an antenna instead?
You now know how to split an over the air antenna signal to multiple tvs.
So as long as the splitter is setup down the line from your new antenna, you should be fine.
Use a basic coaxial cable to run from your antenna into the single input port.
Splitter (purchase a 2-way splitter if connecting antenna to 2 tvs, 3-way splitter if connecting to 3 tvs).
My antenna is in my attic, so i plugged the antenna cable into the closest wall jack in the upstairs bedroom.
Following the directions in this post, you can hook up one antenna to two tvs to watch different programming.
This post I will show you how to split an over the air antenna signal to multiple TV's.
On where your over the air antenna is placed, you can use the closest wall jack to plug your antenna into.